Meanings and general terms of the names of the com

The meaning of the names of the components of the cable tray and the general terms

the meaning of the names of the components of the cable tray and the general terms procedures:

aluminum alloy cable tray:

the abbreviation of the aluminum alloy cable tray device, which is made of aluminum alloy materials, and the straight elbow accessories of the tray or ladder, as well as the supports and hangers, constitute an overall device to support the cable with a continuous rigid structure

ladder:

abbreviation of the part of trapezoidal cable tray that directly supports cables, trapezoidal part composed of two longitudinal sides and several rungs

perforated tray:

abbreviation of the part of perforated trough cable tray that directly supports cables, A trough shaped part with holes at the bottom formed by the bottom plate and sides with holes, or a trough shaped part with holes at the bottom formed by punching and bending of a whole aluminum alloy plate.

non perforated tray:

non perforated trough shaped cable tray is the abbreviation of the part that directly supports the cable, and a trough shaped part formed by the bottom plate and sides, or a trough shaped part with a solid bottom formed by bending a whole aluminum alloy plate

straight through:

a section of rigid linear parts for directly supporting cables that cannot change direction or geometric dimensions

elbow:

a section of rigid non-linear parts for directly supporting cables that can change direction

horizontal elbow:

parts that change the direction of the bridge in the same horizontal plane are divided into 30 degrees, 45 degrees, 60 degrees Four 90 degree horizontal tees:

the components connecting the bridge in three directions at an interval of 90 degrees in the same horizontal plane are divided into two types: equal new energy vehicles account for more than 20% of the production and sales of vehicles, and the width becomes wider.

horizontal tees:

the components connecting the bridge in four directions at an interval of 90 degrees in the same horizontal plane are divided into two types: equal width becomes wider.

vertical upward elbow:

the components that change the direction of the bridge from the horizontal plane to upward

vertical downward elbow:

components that make the bridge change direction downward from the horizontal plane

vertical tee:

components that connect the bridge in three directions at an interval of 7 and 90 degrees of ultra-high molecular weight polyethylene uhmwhpe on the same vertical plane. The utilization rate of degradable plastic is low

widening and straight through:

components that connect bridges of different widths on the same plane

supports and hangers:

abbreviation of cable bridge support components, It is used to directly support the tray ladder through bending. There are bracket cantilever, bracket hanger and other basic types of

Accessories:

used for the connection between straight through and elbow or other supplementary functions, which can include

1. Connecting plate, divided into

◇ straight connecting plate is abbreviated as direct plate

◇ hinged connecting plate is abbreviated as hinged plate, which is divided into horizontal and vertical types

◇ variable width connecting plate is abbreviated as variable width plate

◇ variable height connecting plate is abbreviated as variable height plate

◇ telescopic connecting plate is abbreviated as telescopic plate

◇ vertical support plate is abbreviated. Look at nexus 4 and you will know the support plate

◇ bridge and box or floor connecting plate

2. Terminal board

3. Lower part

4. Cover plate

5. Fasteners

6. Diaphragm (end)