How can the hottest steel drum packaging be worn

2022-08-12
  • Detail

Recently, when the dangerous goods and packaging inspection technology center of Changzhou inspection and Quarantine Bureau conducted a drop test on a batch of steel drums containing dangerous goods submitted by enterprises for inspection, the bottom of two sample barrels fell off. It is understood that since this year, the Bureau has detected samples falling off the bottom of the barrel for three consecutive times

after comparative analysis, the inspectors found that these batches of samples used the hot-rolled steel plate used to make the end of the barrel to make the bottom of the barrel, and the steel plate used to make the bottom of the barrel must use the cold-rolled steel plate according to the requirements, so even if the production process level is higher, the joint between the barrel body and the barrel bottom is very easy to crack upon impact. This hidden defect cannot be detected in the self inspection process of the factory. If such a steel barrel is used to contain chemical 6 Magnetic materials are dangerous goods, which are prone to leakage during transportation, loading and unloading, causing unimaginable losses to life and property. The center carried out statistical analysis on these products in groups. The steel drum packaging resolutely issued a non-conforming report, told them the seriousness of the matter one by one, and required them to rework and rectify all of them, so as to avoid such non-conforming packaging from entering the market. At the same time, the staff of Changzhou Bureau fed back the situation to the enterprises, which regretted the phenomenon of being arrogant in the production process. At the same time, they admitted that the above-mentioned quality problems were caused by taking the wrong materials in the production process because of the large business volume of the factory and insufficient manpower

it is understood that in recent years, with the continuous increase of China's export business of dangerous chemicals, the output and production scale of the dangerous goods packaging production enterprise

industry have also expanded rapidly. However, such events rarely occur when the packaging product named acryviewa enterprise has just been established and put into production. Why does the enterprise grow in size, but the mistakes are getting lower and lower? It is mainly caused by the following two factors:

first, the weak awareness of quality and safety. Dangerous goods packaging production enterprises are very cautious when they just started to develop, and they have strict requirements for product quality control. However, the enterprises have not had quality and safety accidents in the past few years, so they have relaxed their vigilance, and their safety awareness has gradually faded. Therefore, to improve the quality of dangerous goods packaging, we must first improve the quality and safety awareness of relevant personnel, which is the root of promoting technical improvement and improvement

second, the management level has stagnated. In recent years, packaging enterprises have developed very rapidly. Small enterprises have developed into large enterprises in just a few years. Some enterprises pay attention to the improvement of output and scale, but ignore the improvement of enterprise management level and the regular training of employees. The production process has not been improved and innovated for many years. These factors eventually lead to the disconnection between enterprise production and management. Therefore, the management level of the enterprise must keep up with the pace of scale development. While pursuing output, we must ensure that the successful transformation of the Yulian group has played an exemplary and leading role in resolving the excess capacity of the industry

Copyright © 2011 JIN SHI